Sponsored Links

Senin, 22 Januari 2018

Sponsored Links

Viewing Active Ports with NETSTAT - YouTube
src: i.ytimg.com

In computing, netstat (network statistics) is a command-line network utility tool that displays network connections for the Transmission Control Protocol (both incoming and outgoing), routing tables, and a number of network interface (network interface controller or software-defined network interface) and network protocol statistics. It is available on Unix-like operating systems including macOS, Linux, Solaris, and BSD, and is available on Windows NT-based operating systems including Windows XP, Windows Vista, Windows 7, Windows 8 and Windows 10.

It is used for finding problems in the network and to determine the amount of traffic on the network as a performance measurement. On Linux this program is mostly obsolete, although still included in many distributions.

On Linux, netstat (part of "net-tools") is superseded by ss (part of iproute2). Replacement for netstat -r is ip route. Replacement for netstat -i is ip -s, replacement for netstat -g is ip maddr, all of which are recommended instead.


Video Netstat



Parameters

Parameters used with this command must be prefixed with a hyphen (-) rather than a slash (/). If a parameter is supported only on some platform or platforms, the platform or platforms is listed in parentheses after the parameter.


Maps Netstat



Statistics provided

Netstat provides statistics for the following:

  • Proto - The name of the protocol (TCP or UDP).
  • Local Address - The IP address of the local computer and the port number being used. The name of the local computer that corresponds to the IP address and the name of the port is shown unless the -n parameter is specified. An asterisk (*) is shown for the host if the server is listening on all interfaces. If the port is not yet established, the port number is shown as an asterisk.
  • Foreign Address - The IP address and port number of the remote computer to which the socket is connected. The names that corresponds to the IP address and the port are shown unless the -n parameter is specified. If the port is not yet established, the port number is shown as an asterisk (*).
  • State - Indicates the state of a TCP connection. The possible states are as follows: CLOSE_WAIT, CLOSED, ESTABLISHED, FIN_WAIT_1, FIN_WAIT_2, LAST_ACK, LISTEN, SYN_RECEIVED, SYN_SEND, and TIME_WAIT. For more information about the states of a TCP connection, see RFC 793.

Using Netstat to Determine IP Addresses Connecting to ION Site ...
src: i.ytimg.com


Examples

To display the statistics for only the TCP or UDP protocols, type one of the following commands:

netstat -sp tcp

netstat -sp udp

On Unix-like systems:

To display all ports open by a process with id pid:

netstat -aop | grep "pid"

To continuously display open TCP and UDP connections numerically and also which program is using them on Linux:

sudo netstat -nutpacw


On Microsoft Windows:

To display active TCP connections and the process IDs every 5 seconds, type the following command (works on NT based systems only, or Windows 2000 with hotfix):

netstat -o 5

To display active TCP connections and the process IDs using numerical form, type the following command (works on NT based systems only, or Windows 2000 with hotfix):

netstat -no


Live Response: Collecting Volatile Data (Windows Forensic Analysis ...
src: what-when-how.com


Examples (*nix)

Wildcards

Netstat uses a asterisk * as a wildcard which means "any". An example would be

Example output:

Under "Local Address" *, in *:smtp, means the process is listening on all of the network interfaces the machine has for the port mapped as smtp (see /etc/services for service resolution). This can also be shown as 0.0.0.0. The second *, in *:*, means connections can come from any IP address, and the third *, in *:*, means the connection can originate from any port on the remote machine.


Ubuntu Networking Basics --- netstat - YouTube
src: i.ytimg.com


Caveats

Some versions of netstat lack explicit field delimiters in their printf-generated output, leading to numeric fields running together and thus corrupting the output data.


Monitorización de conexiones de red | Redes Telemáticas
src: redestelematicas.com


Platform specific remarks

Under Linux, raw data can often be obtained from the /proc/net/dev to work around the printf output corruption arising in netstat's network interface statistics summary, netstat -i, until such time as the problem is corrected.

On the Windows platform, netstat information can be retrieved by calling the GetTcpTable and GetUdpTable functions in the IP Helper API, or IPHLPAPI.DLL. Information returned includes local and remote IP addresses, local and remote ports, and (for GetTcpTable) TCP status codes. In addition to the command-line netstat.exe tool that ships with Windows, GUI-based netstat programs are available.

On the Windows platform, this command is available only if the Internet Protocol (TCP/IP) protocol is installed as a component in the properties of a network adapter in Network Connections.

On the Windows platform running Remote Desktop Services (formerly Terminal Services) it will only show connections for the current user, not for the whole computer.

On macOS, the /Applications/Utilities folder contains a network GUI utility called Network Utility, the Netstat tab of which runs the netstat command and displays its output in the tab.


Basics of ipconfig, ping, tracert, nslookup, and netstat - YouTube
src: i.ytimg.com


See also

  • ss, a Linux utility to investigate sockets from iproute2 meant to replace netstat
  • lsof -i

Hướng dẫn sử dụng lệnh NETSTAT trên Windows quản lý mạng ...
src: cuongquach.com


References


Redhat Enterprise Linux - Network Command, Telnet / Netstat / Ssh ...
src: i.ytimg.com


External links

  • netstat(8) - Linux Programmer's Manual - Administration and Privileged Commands
  • netstat(1) - FreeBSD General Commands Manual
  • netstat(1M) - Solaris 10 System Administration Commands Reference Manual
  • Microsoft TechNet: Netstat - documentation for the Windows netstat.exe command-line program
  • net-tools project page on SourceForge

Source of the article : Wikipedia

Comments
0 Comments